With power outages happening all the time, people and businesses will be unable to do business if they don’t have running power. If a power outage is caused by an outside source and begins impacting your life on a daily basis, you may want to evaluate surge protection device installations with the help of residential electricians in Woodvale.
We all understand our home’s complex electric network and also that from nowhere, you would receive a phone call, email or a text in case of any electric emergency or fault occurrences. All electric devices are different that work at different electric parameters. That’s why it is critical to know the importance of protection systems that should be applied as the wrong or inappropriate installation shall do only harm as it is known that taking preventive measures is the best way to make sure that electric hazards do not affect your building and equipment. This is one of the reasons why we need to understand every little detail about power supplies. We need to be knowledgeable enough about the types of high voltage power supplies because they can greatly affect any business.
Scary electrical problems arise that hamper proper functioning and life span of the lighting system, air conditioners, security and surveillance system, computer system and peripherals, telecom systems, industrial machinery and equipment, etc. and therefore upgradation and profound reworking in safety incorporation is required. As we are talking about electrical safety surge protection devices come first in our mind which are robust and rugged solutions for your electrical & electronics equipment, control automation and networking device and offers adequate protection from high Power Surges, Ground Potentials Change & Distant lightning activities and many more
Every blog and article from us is to spread awareness and knowledge on important electric safety requisites and tips for homes and businesses. In this blog, we shall discuss different electric safety devices to be installed for every electric network maintenance.
- FUSES:
It is important to have fuses in place as a safety measure against high current surges flowing through any circuit. The design of fuses includes a thin metal strip usually made out of copper or zinc, which maintains the electric connection open. If a high current happens to flow through the circuit, then the fuses and circuit breakers form the primary safety defence by breaking the connection to the associated circuit. When the threshold current limit exceeds, the metal strip overheats and melts on detection of this abnormally high current via the circuit. These devices can be trusted because they are designed and installed to allow only the permissible amount of current within the network, although it should be replaced with another fuse of the same specification after each fault event.
- GROUND FAULT CIRCUIT INTERRUPTERS (GFCI):
Ground fault circuit interrupters (GFCI’s) are devices incorporated in an electric network to intervene fault current occurrences into the system just by analyzing the amount of current entering and exiting from the electric equipment along the circuit conductor. There are varieties of GFCIs available for detecting anomalies in the output current on the neutral side to that of the input current on the hot side for any leaks, which can be even as low as 4 mill amperes. They are built to work almost similar to fuses, but unlike the latter, GFCI’s need not be replaced after every single fault occurrence.
- SURGE PROTECTION DEVICES OR TRANSIENT VOLTAGE SURGE SUPPRESSOR:
Electric devices working on high or low voltage – both can be susceptible to sudden surge spikes occurring in the normal flow of electric current. Electric spark or shock on higher-end electric devices are due to 2 major sources, i.e. Lightning effects or frequent switching activity, for which safety standards and codes suggest the installation of Surge protection devices of appropriate current and voltage ratings. Anomalies in the flow of current, if not detected, would wreak havoc to associated devices if not invested in proper protection devices.
Read More: Top Tips To Help Prevent An Electrical Fire At Home
There are recommended electrical safety standards and practices that ought to be used at industrial sites that can mitigate internal voltage transients or sudden spikes in electric current. For complete protection, it’s critical that every building must invest in both an External lightning protection system and appropriate whole house internal surge protection devices/ transient voltage surge suppressor – connected to reliable maintenance-free earthing system setup as recommended to offer high level electric and fire safety. However, it’s the safety of people and equipment at the workplace and home that matters, which is the realistic requirement for any industry and any business.
